| Sign In | Join Free | My insurersguide.com |
|
DDR : LPDDR-III 1GB (2GB optional)
Bluetooth : Built-in high performance serial interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
Ambient Requirement : Working temperature -20°~70°, working humidity 0%~95% (non-condensing)
USB 2.0 Interface : 4 USB 2.0 4P pin headers, 1 USB 2.0 OTG 4P pin header or extended pin header
Door Control : 1 x SPDT access control relay interface (max. 2A)
Delivery Time : 5-8 work days
CPU : RV1109 Cortex-A7 Dual Core, 1.2Tops NPU, 5M ISP with 3 Frame HDR
Ethernet : 10/100M Adaptive Ethernet RJ45 connector
MIC Input : Digital SiliconMIC DMIC input (pin header)
LED Port : 3 × LED driver switch interfaces (for 3-color LED indicators)
USB Camera : Support dual USB cameras within 2 million pixels
Amplifier Output : 8 Ohm 6W Dual Audio Amplifier Output
PWM LED Fill Light Port : 1 PWM LED fill light driver port (LED+/-)
Dual MIPI Camera : 40-Pin FPC Dual MIPI HD camera port (Recommend SV-ZI16-90 REV1.1)
Wiegand Interface : 1 Wiegand input and 1 Wiegand output port
WiFi : Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n
Size : Length*Width*Height (110mm*68mm*10mm), PCB top side height 5.5mm
Security Port : 1 × tamper-proof / anti-explosion control interface
Android Version : Recommended Linux Buildroot+Qt5
Storage : The default comes with an 8GB EMMC NAND chip that can scale up to 128GB
Face Recognition Authorization : Support for Megvii face chip
MIPI-DSI : 31-Pin FPC MIPI-DSI display port supporting up to 1920x1200
Real Time Clock : Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off
I2C Bus : I2C pin header and FPC for I2C capacitive screen and etc.
Model Number : Fi-1109 Mainboard
Place of Origin : China
MOQ : Negotiable
Price : Negotiable
Payment Terms : T/T
Supply Ability : 200+/day
LED Indicator Light : SMD system status indicator LED light for running status
Serial Ports : 1 TTL/RS-232/RS-485 compatible, 3 TTL/RS-232 compatible, 1 TTL port
Buttons : Two extended buttons (PW and Reset) and two side buttons (UBOOT and Reset)
DC Input : Supports 9~15V wide voltage DC power input
Fi-1109 Smart Face Recognition Access Control Motherboard
The Fi-1109 Smart Face Recognition Access Control Motherboard is purpose-built for high-performance biometric authentication, powered by the Rockchip RV1109 dual-core Cortex-A7 processor running at up to 1.5GHz. What sets this board apart is its built-in 1.2 TOPS NPU, enabling efficient on-device AI inference for face recognition without cloud dependency. The board supports up to 3 cameras simultaneously with a 5MP ISP featuring 3-frame HDR — ensuring reliable face capture in challenging lighting conditions. Dedicated interfaces include dual MIPI camera ports, SPDT door control relay (up to 2A), Wiegand input/output, 3× LED driver interfaces, a PWM fill-light port, and a security tamper-proof interface. The Fi-1109 also features 500万 H.264/H.265 hardware video encoding and decoding, dual 8Ω 6W audio amplifiers for clear voice prompts, and wide-temperature operation from -20°C to 70°C. With pre-integrated Megvii face recognition authorization and Linux Buildroot+Qt5 support, the Fi-1109 delivers a complete, production-ready solution for access control OEMs.
Built-in 1.2 TOPS NPU for On-Device AI: The integrated NPU enables efficient face detection and recognition directly on the board — no cloud dependency, no external accelerator, ultra-low latency for real-time authentication.
Multi-Camera Support with HDR: Supports up to 3 cameras simultaneously with 5MP ISP and 3-frame HDR — capture high-quality images even in challenging backlight or low-light conditions. Dual MIPI-CSI ports enable flexible camera configurations.
Hardware Video Encode/Decode: H.264/H.265 hardware encoding and decoding at 500万 resolution — compress and stream video efficiently for remote monitoring or cloud upload without burdening the CPU.
Comprehensive Access Control Interfaces: SPDT relay (up to 2A) for door lock control, Wiegand input/output for card readers, 3× LED driver interfaces for multi-color status indicators, PWM fill-light port for night capture, and a security tamper-proof interface for anti-tamper protection.
Pre-Integrated Face Recognition Authorization: Ships with Megvii face chip authorization — reduce development time and licensing headaches with a ready-to-deploy solution.
Wide-Temperature Reliability: -20°C to 70°C operating temperature range ensures stable operation in outdoor environments, unheated entryways, and demanding industrial settings.
NPU-Powered Face Recognition, No Cloud Needed: The 1.2 TOPS NPU delivers efficient on-device AI inference — face recognition happens locally, ensuring privacy, low latency, and uninterrupted operation even without network connectivity.
3-Camera Ready for Advanced Applications: Support for up to 3 simultaneous cameras enables multi-angle capture, wide-area coverage, or redundancy — ideal for high-security environments requiring comprehensive monitoring.
HDR Imaging for Real-World Conditions: 3-frame HDR ensures reliable face capture in backlit, low-light, or high-contrast environments — no more "washed out" faces in sunlight or dark silhouettes in shadows.
Production-Ready with Megvii Integration: Pre-integrated face recognition authorization means you don't need to negotiate licensing or implement complex algorithms — get to market faster with a proven, trusted solution.
Security-Focused Hardware Design: Tamper-proof interface + wide-temperature operation + comprehensive access control interfaces — the Fi-1109 is engineered for secure, reliable deployment in real-world access control environments.
| Item | Details |
|---|---|
| Packaging | Anti-static bag + foam padding + industrial carton |
| MOQ | 1 piece (sample order), 100+ for volume pricing |
| Lead Time | 3–5 working days for samples; 15–20 working days for bulk orders |
| Shipping | DHL, FedEx, UPS, or by sea (customer's choice) |










|
|
Fi-1109 Face Recognition Access Control Motherboard Wiegand, relay interface Images |